Your Connection to Move the World

  

INCON TS-LS300

AutoLearn

Line Leak Detection

"Distributors of
Petroleum Equipment"
Toll Free: 1-877-737-4690   Fax: 616-457-8919

HOME CONTACT INFO LOCATION TERMS TANK CLEANING SPECIALS

Because of the many different options and every site is different every system will be quoted separately.
 Please contact Phil for a quote or for more information at phil@strickequipment.com




TS-LS300

Features

  • Automatically learns exact pipeline characteristics.

  • No pipe type and length programming required.

  • Monitors flexible, steel and/or fiberglass pipelines in any combination up to certified maximum values.

  • Works with submersible pumps generating 25 psi or more.

  • Visual and audible alarm indications.

  • Automatically performs 3.0 gph, 0.2 gph and 0.1 gph line tests.

  • Can control remote visual and audible alarms.

  • Positive submersible pump shut down in the event of a leak.

  • Can be monitored through ATG and System Sentinel.
Benefits
  • Third party certified for 0% probability of false alarm.
  • Eliminates the need for factory calibration or on-site field judgments for set up.
  • For use in rigid, flex and rigid/flex piping configuration.
  • Immediate notification of alarm condition.
  • Eliminates need to perform separate annual line tests.
  • Allows printed compliance reports.
Capabilities
  • The TS-LS300 performs a 3.0 gph leak and pressure test after every dispense.  Upon detection of a failed test, the LS300 will alarm and positively shut down the affected turbine.
  • The TS-LS300 continuously monitors pressurized lines for thermally stable conditions and performs a 0.2 gph monthly and 0.1 gph annual precision leak test during the thermally stable period.
TS-LS300 SPECIFICATIONS:
Dimensions: 12" H x 11" W x 4" D
Number of lines monitored: 1, 2, 3 or 4
Console operating temperature: 50° to 122° F (10° to 50° C)
Transducer operating temperature: -40° to 149° F (-40° to 65° C)
Cable, Belden #9363-22 AWG, #9364-20 AWG OR #9365-18 AWG
Maximum cable distance, sensor to console: 500 feet
Power Requirements: 115 VAC +15%, -10%, 100 Watts max., 1 Amp max.

230 VAC +15%, -10%, 100 Watts max., 0.5 Amp max.
Applicable liquids: Motor fuels
Operating pressure: 0 to 100 psi
Sensor port fitting: 2" NPT Female
Sensor material: Body - anodized aluminum

Active elements (sensor) - stainless steel
Intrinsically safe - Transducer: Class 1, Div. 1, Group D - New installations
Explosion proof - Transducer: Class 1, Div. 1, Group D - Retrofit installations

Because of the many different options and every site is different every system will be quoted separately.
 Please contact Phil for a quote or for more information at phil@strickequipment.com